Front Service LED video Display
front access module LED video Screen
doubt that the "front open lid" type is a very good front service led display sign solution. But if the led screen is higher than 2m, it would be very difficult to design the front open lid type, as the "lid" with led modules assembled would be too heavy for the barometric leg to afford.
For example of this installation:
There would be no maintenance service channel behind of the led screen, as the installation would need the led screen surface level up with the glass around of it.
As well, it is very high.
Above is the description of one circumstance. There are also other circumstances, for example if you're going to design a high and double-sided led display screen, and there would be no space between the 2 sides.
For example of this installation:
It doesn't mean that the "front access module" type front service solution is only for the portrait type led display screen.
In fact, there's no restrict with the led screen size. You could build the big size led displays with "front access modules".
front service led
front access modules" are actually combined with the "back door service" or the "front open lid" led cabinets.
The "back door service" solution and the "front open lid" solution are based on the led cabinet design. But the "front access module" solution is based on the led module design.
The common led modules are assembled onto the cabinet from the rear side, but the "front access modules" are assembled on the the cabinet from the front side.
back service led module
front service led module
We will only recommend the "front access modules" solution when:
1. The height of the screen is ＞ 2m.
2. Impossible to leave a room ≥ 80cm, behind of the led display screen.
No comments:
Post a Comment