Wireless GPRS Solution for LED Display Screens

Wireless GPRS Solution for LED Display Screens

The usage of LED display screens is getting wider, such as advertising LED screens, traffic LED screens, etc. However, users have to do a lot of work to update the LED displays contents due to numerous numbers and widely distribution. In order to solve this problem, our company has successfully researched and developed LED display screens control systems based on GPRS. As long as users can access the internet and find the control card which connects with GPRS, they can control display contents and achieve off-site control. In this way, users can solve problems by transmitting over a long distance and with one PC it controls multiple LED display screens.

GPRS Traits for LED Display Screens

 

Making efficiency reliable Transmission Control Protocol (TCP) based on features of GPRS communication so as to adjust packets transfer rates (Mbps) and use GPRS bandwidth effectively, average rates could reach to 15kbps.

Supporting Transmit Data Searching and Document Resuming. It just transmits the amendment part every time so as to reduce GPRS traffic and save costs for customers.

GPRS not only can transmit simple texts message but also pictures and videos.

Programming Software will process videos and pictures according to the screen’s size then transmit through harmless compression and storage, making a storage cell can perform information as much as possible.

 

LED Screen GPRS System Structure

 

Connecting users’ PC with ADSL router by LAN line, inserting ADSL router into Internet by telephone line or in other ways.

Connecting control card with GPRS modules by serial port 232.

Connecting control card with display screen by normal adapter plate and flat cables.

 

Compositions of LED Screen GPRS Main Hardware and Software

LED Screen GPRS Hardware

 

ADSL router (recommended types: TP-LINK, TD-W89541G)

LED display screen control card (our company’s M-series control cards)

Normal adapter plate (HUB: used for connecting display screen with control card)

LED display screen

Users’ PC that can control LED display screen (need to install LED Editor Software)

 

LED Screen GPRS Software

 

Name of LED display screen control card: LED Editor

Wireless M-GPRS.exe software

Interface screenshot of LED Editor Software as shown in image 1 below

Interface screenshot of M-GPRS wireless Software as shown in image 2 below

 

LED Screen GPRS Software

Interface screenshot of M-GPRS wireless Software as shown in the image below:

Interface screenshot of M-GPRS wireless Software

Configure M-GPRS for LED Screens

The factory default configuration has completed, connecting the M-GPRS with the control card directly as shown below.

Configure M-GPRS with Control Card Directly

Factory default, do not need configure anymore, if you want to change M-GPRS configuration, please refer to notes: methods of changing M-GPRS DTU configuration.

Operating steps of PC-Console

There are three steps to configure the PC console:

Step 1: Run M_GPRS.exe software then input following parameters, as shown in image below:

Run M_GPRS.exe software then input following parameters

Step 2: Select GPRS DTU of on-line screen which needs to be operatedmap out port. As shown in the image below:

Select GPRS DTU of on-line screen which needs to be operated

After confirming, users can see mapping port, as shown in the image below:

users can see mapping port

Step 3: Run Led Editor softwareselected serial port in step 2, as shown in the image below:

Run LED Editor selected serial port

Note: this is virtual serial port so its baud rate may be any values in down-drop box.

Configuring LED Editor for LED Screens with One Control Card

One PC only controls one control card connecting with M-GPRS DTU. Configuration steps of Led Editor as follows: Click “Options” on menu → Software Setup → select “Communication parameters”: tick the box in the front of “stand-alone mode”, GPRS. As shown in the image below:

One control card connecting with M-GPRS DTU

After this, users can connect GPRS with screen just as simple as connect local serial port with screen by LAN.

Configuring LED Editor for LED Screens with Multiple Control Cards

One PC can simultaneously control multiple control cards connecting with M-GPRS DTU. Configuration steps of Led Editor as follows: Click on “Options” in menu → Software Setup → select “Communication parameters”: tick the box in the front of “Multi-mode”, input password, (default password is 888). As shown in the image below:

Configuring LED Editor for LED Screens with Multiple Control Cards

Communication type is GPRS and there is VSP port table, as shown in the image below:

Communication Parameters

Config GPRS virtual COM Table

Screenshot of sending program by GPRS under multi-mode condition, as shown in image below:

Communication Parameters

Methods of changing M-GPRS DTU configuration

Configuration preparation and connection. You can insert web-enabled GPRS data card into SIM connector then connect M-GPRS configuration serial port with PC port by serial port line, at last, connect M-GPRS antenna.

Login configuration interface, three steps are needed:

Step 1: running M-GPRS-DTU-CF.exe software, click on “options” button then select the serial port that PC can connect with M-GPRS in the box of “COM”, click OK. Click on “start configuration”. As shown in image 20-13 in below:

M-GPRS Configuration Software

Step 2: turn on M-GPRS power (power port is inner positive and exterior negative).

Step 3: when version information appears in configuration box, please press “enter” into configuration interface.

Note: turn on M-GPRS power within 15 seconds after clicking on “start configuration”.

Configure M-GPRS parameters

Step 1: configure “date center domain name/IP”, input IP address then press “enter” into the next step.

Step 2: configure “DSC port”input DSC monitoring port then press “enter” into the next step.

Step 3: configure baud rate which consistent with control card, have eight numbers and end number is 1.

Step 4: other parameters can be omitted, press “enter” until “storage configuration” and “restart” appear then input “YES” to complete configuration. At last, turn off power and restart.

Note: please inquiry suppliers about DSC domain name/IP and port.

Methods of configuring serial port baud rate of the control card

Serial port or internet connects with control card under stand-alone moderunning Led Editor → Menu → Options → Hardware Setup Baud rates of COM-R232 and M-GPRS must keep consistent with each other. As shown in the image below:

Baud rates of COM-R232 and M-GPRS must keep consistent with each other

Tags:Gprs Led DisplaysGprs Led ScreensWireless Control Led DisplaysWireless Control Led ScreensWireless Led DisplaysWireless Led Screens