LED display screen EMC standards list
The Australian Communications and Media Authority (ACMA) incorporates the listed standard(s) as a mandatory standard under section 162 of the Radiocommunications Act 1992 as part of the ACMA's Electromagnetic Compatibility (EMC) Regulatory Arrangement.
It is important to note that:
The expiry date listed in Column 9 of the standard refers to the expiry of the replaced standard listed in Column 8 of the table.
The applicable standard listed in column 2 is modified by any relevant notes listed in Column 10 of the table.
Expired standards are listed in a seperate document. These standards are not applicable standards for new equipment and are listed for information only.
The expiry date listed against the standard in Column 9 indicates the day after the last day that the standard could be used for compliance of new equipment.
Some original columns have been removed as the information was not pertinent. Original column numbers have been retained to align the table with the Radiocommunications (Electromagnetic Compatibility) Standard 2008
*For any standard listed with an AC, the ACMA will accept the test report with or without the AC as these are editorial changes
Part 1 Generic standards
| |||||||
1
|
2
|
3
|
4
|
7
|
8
|
9
|
10
|
Item No.
|
Applicable Standard
|
Full Title of Standard
|
Publication Date
|
Brief description of equipment to which standard should apply
|
Standard being replaced
|
Expiry Date of replaced standard
|
Remarks
|
AS/NZS 61000.6.3: 2007
|
Electromagnetic compatibility (EMC) – Part 6.3: Generic standards – Emission standard for residential, commercial and light-industrial environments
|
31/05/2007
|
All equipment intended for use in a residential, commercial, or light industrial environment that is not covered by one of the product family standards
|
AS/NZS 4251.1:1999
|
31/05/2009
|
Harmonics and Flicker not required
| |
EN 61000-6-3: 2007
|
2007
|
EN 61000-6-3: 2001 + A11 (2004)
|
01/12/2009
|
Harmonics and Flicker not required
Due to expire 12/01/2014
| |||
EN 61000-6.3:2007/A1:2011
|
2007
|
EN 61000-6-3: 2007
|
12/01/2014
|
Harmonics and Flicker not required
| |||
IEC 61000-6-3:2006
|
17/07/2006
|
IEC 61000-6-3:1996
|
17/07/2008
|
Harmonics and Flicker not required
| |||
AS/NZS 61000.6.4: 2007
|
Electromagnetic compatibility (EMC) – Part 6.4: Generic standards – Emission standard for industrial environments
|
31/05/2007
|
All equipment intended for use in an industrial environment that is not covered by one of the product family standards
|
AS/NZS 4251.2:1999
|
31/05/2009
|
Harmonics and Flicker not required
| |
EN 61000-6-4:2007
|
02/03/2007
|
EN 61000-6-4:2001
|
01/12/2009
|
Harmonics and Flicker not required
Due to expire 12/01/2014
| |||
EN 61000-6-4:2007/A1:2011
|
EN 61000-6-4:2007
|
12/01/2014
|
Harmonics and Flicker not required
| ||||
IEC 61000-6-4:2006
|
10/07/2006
|
IEC 61000-6-4:1997
|
10/07/2008
|
Harmonics and Flicker not required
| |||
Part 2 – Product Family and Equipment Standards
| |||||||
1
|
2
|
3
|
4
|
7
|
8
|
9
|
10
|
Serial
|
Applicable Standard
|
Title of Standard
|
Publication Date
|
Brief description of equipment to which standard should apply
|
Standard being replaced
|
Expiry Date of replaced standard
|
Remarks
|
EN 50083-2:2012
|
Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic Compatibility for Equipment
|
Cable networks for television signals, sound signals and interactive services
|
EN 50083-2:2006
|
21/06/2013
| |||
IEC 60728-2:2002
|
Cabled distribution systems for television and sound signals- Part 2: Electromagnetic Compatibility for Equipment
|
22/10/2002
|
Cabled distribution systems for television and sound signals
|
-
|
-
|
-
| |
AS/NZS CISPR 11:2004 (2ndEdition)
|
Industrial scientific and medical (ISM) radio-frequency equipment – Electromagnetic disturbance characteristics – Limits and methods of measurement
|
25/11/2004
|
Industrial scientific and medical (ISM) radio-frequency equipment
|
AS/NZS 2064
|
21/12/2007
|
Note: The ISM band for Australia is 915-928 MHz, not 902-928 MHz as shown in the standard. Devices operating outside 915-928 MHz are not acceptable in Australia.
| |
AS/NZS CISPR 11:2011
|
30/11/2010 (AU)
10/12/2010 (NZ)
|
AS/NZS CISPR 11:2004 Ed 2
|
17/11/2013
| ||||
CISPR 11:2003 with amdts 1 (2004) and 2 (2006)
|
06/2003
|
CISPR 11:
|
21/12/2007
| ||||
CISPR 11:2010
(CISPR 11:2009 with amdt 1-2010
Edition 5.1
|
19/05/2010
|
CISPR 11:2003 with amdts 1 (2004) and 2 (2006)
|
17/11/2013
| ||||
EN 55011:2009
/A1:2010 |
Industrial scientific and medical (ISM) radio-frequency equipment – Electromagnetic disturbance characteristics – Limits and methods of measurement
|
Industrial scientific and medical (ISM) radio-frequency equipment
|
EN 55011:2009
|
01/07/2013
| |||
AS/NZS CISPR 12:2009
|
Vehicles, boats and internal combustion engines – Radio disturbance characteristics – Limits and methods of measurement for the protection of off-board receivers
|
22/06/2009
|
Land based vehicles (including electric powered vehicles), boats and devices with internal combustion engines
|
AS/NZS CISPR 12:2006
|
04/10/2012
| ||
EN 55012:2007
/A1:2009 |
EN 55012:2007
|
01/07/2012
| |||||
CISPR 12:2007
|
Vehicles, boats and internal combustion engine driven devices – Radio disturbance characteristics – Limits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/devices
|
23/05/2007
|
Land based vehicles (including electric powered vehicles), boats and devices with internal combustion engines
|
CISPR 12:2001
|
23/05/2009
|
-
| |
AS/NZS CISPR 13:2004
|
Sound and television broadcast receivers and associated equipment – Radio disturbance characteristics – Limits and methods of measurement
|
06/06/2004
|
Sound and television broadcast receivers, set top boxes, radio receivers, satellite receivers, analog and digital, DVD players, Video recorders, CD players, audio amplifiers, surround sound equipment
|
AS/NZS 1053
|
21/12/2007
|
Due to expire 27/06/2014
| |
AS/NZS CISPR 13:2012
|
27/06/2012
|
AS/NZS CISPR 13:2004
|
27/06/2014
|
-
| |||
EN 55013:2001
/A2:2006 |
EN 55013:2001
+ A1:2003 |
01/03/2009
| |||||
CISPR 13:2006
(Consolidated edition of CISPR 13:2001 with amdts 1 (2003) and 2 (2006))
|
2001
|
CISPR 13
|
21/12/2007
| ||||
|
|
AS/NZS CISPR 14.1:2010
|
Electromagnetic Compatibility – Requirements for household appliances, electric tools and similar apparatus – Part 1: Emissions
|
03/03/2010
|
Household appliances, power tools, battery operated tools, electric and electronic toys, heating appliances, kitchen machines, motor operated appliances
|
AS/NZS CISPR 14.1:2003
|
04/10/2012
| Due to expire 24/06/2015 |
AS/NZS CISPR 14.1:2013
|
20/06/2013
|
AS/NZS CISPR 14.1:2010
|
24/06/2015
| ||||
EN 55014-1:2006/ A1:2009
|
2006
|
EN 55014-1:2006
|
01/05/2012
|
Due to expire 16/08/2014
| |||
EN 55014-1:2006
/A2:2011 |
2006
|
EN 55014-1:2006 + A1:2009
|
16/08/2014
| ||||
CISPR 14-1:2009
(Consolidated edition of CISPR 14-1:2005 with amdt 1 (2008))
|
11/02/2009
(11/11/2005 )
|
CISPR 14-1:2000
with amdts 1 (2001) and 2 (2002)
|
21/12/2007
|
-
| |||
AS/NZS CISPR 15:2011
|
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
|
20/12/2011
|
Lighting equipment, lighting accessories such as ballasts, transformers, dimmers
|
AS/NZS CISPR 15:2006
|
09/02/2013
|
Testing above 30 MHz mandatory from 9 Feb 2013
| |
EN 55015:2006
/A2:2009 |
EN 55015:2006
+ A1:2007 |
01/03/2012
| |||||
CISPR 15:2009
(Consolidated edition of CISPR 15:2005 with amdt 1 (2006) and amdt 2(2008))
|
12/01/2009
(2005)
|
CISPR 15:2000
|
21/12/2007
|
Testing above 30 MHz mandatory from 9 Feb 2013
| |||
AS/NZS CISPR 22:2009
|
Information technology equipment – Radio disturbance characteristics – Limits and methods of measurement
|
21/08/2009
|
Information technology equipment, modems, fax machines, BPL modems
|
AS/NZS CISPR 22:2006
|
04/10/2012
|
Testing radiated emissions above 1 GHz from 1/10/2011.
| |
AS/NZS CISPR 22:2009 with Amdt 1 (2010)
|
01/12/2010
|
AS/NZS CISPR 22:2009
|
01/12/2013
| ||||
EN 55022:2010 + *AC:2011
|
2010
|
EN 55022:2006 and its amendments
|
01/12/2013
| ||||
CISPR 22:2005 with amdts 1 (2005) and 2 (2006)
|
04/2005
|
CISPR 22: 2003
|
21/12/2007
| ||||
CISPR 22: 2008
|
24/09/2008
|
CISPR 22:2006
|
24/09/2010
| ||||
EN 60974-10:2007
|
Arc welding equipment – Part 10: Electromagnetic compatibility (EMC) requirements
|
2007
|
Arc welding equipment
|
EN 60974-10:2003
|
01/12/2010
|
-
| |
IEC 60974-10:2007
|
29/08/2007
|
IEC 60974-10:2004
|
29/08/2009
|
-
| |||
EN 50065-1:2001/A1:2010
|
Specification for signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz. General requirements, frequency bands and electromagnetic disturbances
|
Signalling on low-voltage electrical installations
|
EN 50065-1:2001
|
01/10/2012
|
Due to expire 21/03/2014
| ||
EN 50065-1:2011
|
EN 50065-1:2001/A1:2010
|
21/03/2014
| |||||
IEC 61000-3-8:1997
|
Electromagnetic compatibility (EMC) - Part 3: Limits - Section 8: Signalling on low-voltage electrical installations - Emission levels, frequency bands and electromagnetic disturbance levels
|
26/09/1997
|
Signalling on low-voltage electrical installations
|
-
|
-
|
-
| |
AS 62040.2:2008
|
Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements
|
19/03/2008
|
Uninterruptible power systems (UPS)
|
AS 62040.2 :2001
|
19/03/2010
|
Immunity, harmonics and flicker not required
| |
EN 62040-2:2006
+ AC:2006 |
2006
|
EN 50091-2:1995
|
01/10/2008
|
-
| |||
IEC 62040-2:2005
|
10/2005
|
IEC 62040-2:1999
|
21/12/2007
|
-
| |||
EN 50148:1995
|
Electronic taximeters
|
1995
|
Electronic taximeters
|
Relevant generic standards
|
15/12/1995
|
-
| |
EN 50263:1999
|
Electromagnetic compatibility (EMC). Product standard for measuring relays and protection equipment
|
1999
|
Measuring relays and protection equipment
|
Relevant generic standards
|
01/08/2002
|
-
| |
EN 50270:2006
|
Electromagnetic compatibility. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
|
2006
|
Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
|
EN 50270:1999
|
01/06/2009
|
-
| |
EN 55103-1:2009
|
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 1: Emission
|
Professional audio / video equipment
|
EN 55103-1:1996
|
01/07/2012
| |||
EN 60204-31:1998
+*AC:2000 |
Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems
|
1998
|
Sewing Machines designed specifically for professional use in the sewing industry
|
Relevant generic standards
|
01/06/2002
|
-
| |
IEC 60204-31:2001
|
10/12/2001
|
IEC 60204-31:1996
|
21/12/2007
|
-
| |||
EN 60439-1:1999
|
Low-voltage switchgear and control gear assemblies - Part 1: Type-tested and partially type-tested assemblies
|
1999
|
Low-voltage switch gear and control gear assemblies
|
EN 60439-1:1994
+ A11:1996 |
01/08/2002
|
Due to expire 01/11/2014
| |
EN 61439-1:2009
|
EN 60439-1:1999
|
01/11/2014
|
Due to expire 23/09/2014
| ||||
EN 61439-1:2011
|
EN 61439-1:2009
|
23/09/2014
| |||||
IEC 61439-1:2009
|
Low-voltage switchgear and control gear assemblies - Part 1: General rules
|
22/01/2009
|
IEC 60439-1:2004
|
22/01/2011
|
-
| ||
EN 60669-2-1:2004/A12:2010
|
Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches
|
Electronic switches for household and similar use
|
EN 60669-2-1:2004
+ A1:2009 |
01/06/2013
| |||
IEC 60669-2-1:2009
|
28/01/2009
|
IEC 60669-2-1:2002
|
28/01/2011
|
-
| |||
EN 60669-2-2:1997
|
Switches for household and similar fixed electrical installations - Part 2-2: Particular requirements - Electromagnetic remote-control switches (RCS)
|
1997
|
Electromagnetic remote-control switches (RCS) for household and similar use
|
-
|
-
|
-
| |
IEC 60669-2-2:2006
|
29/08/2006
|
IEC 60669-2-2:1996
|
29/08/2008
|
-
| |||
EN 60669-2-3:1997
|
Switches for household and similar fixed electrical installations - Part 2-3: Particular requirements - Time-delay switches (TDS)
|
1997
|
Time-delay switches (TDS) for household and similar use
|
-
|
-
|
-
| |
IEC 60669-2-3:2006
|
29/08/2006
|
IEC 60669-2-3:1997
|
29/08/2008
|
-
| |||
EN 62053-22:2003
|
Electricity metering equipment (a.c.) - Particular requirements - Part 22: Static meters for active energy (classes 0,2 S and 0,5 S)
|
2003
|
Static meters for active energy (classes 0,2 S and 0,5 S)
|
EN 60687:1992
|
01/03/2006
|
-
| |
IEC 62053-22:2003
|
28/01/2003
|
IEC 60687:1992
|
21/12/2007
|
-
| |||
EN 60730-1:2011
|
Automatic electrical controls for household and similar use - Part 1: General requirements
|
Automatic electrical controls for household and similar use
|
EN 60730-1:2000 and its amendments
|
01/10/2013
| |||
IEC 60730-1:2007
(Consolidated edition of IEC 60730-1:1999 with amdts 1 (2003) and 2 (2007))
|
28/03/2007
(1999)
|
-
|
-
|
-
| |||
No comments:
Post a Comment